Linksys PAP2T

  1. You must connect your ATA to your router in order to get an IP address
  2. Pick up your phone and dial 4 times *
  3. Once the operator is asking to enter an option, dial 110#. Please listen carefully to the IP address as this is what needs to be typed on the web browser in order to access the PAP2T
  4. Once you are in the device use these steps to configure your ATA.
  5. Click on Admin login on the left and then Switched to Advanced View in the middle
  6. System Tab
    1. Primary NTP Server: time.nist.gov
    2. Secondary NTP Server: pool.ntp.org
  7. Provisionning Tab
    • Provision Enable: Yes
    • Profile Rule: http://bill2.vif.com/$A/$MA.cfg
    • GPP A: 2
  8. Regional Tab
    1. Ring Waveform: Sinusoid
    2. Ring Frequency: 25
    3. Ring Voltage: 70
    4. TimeZone: GMT -05:00
    5. Daylight Savings Time Rule: start=3/8/7/2:00;end=11/1/7/2:00;save=1
  9. Line 1
    1. Line Enable: Yes
    2. NAT Mapping Enable: Yes
    3. NAT Keep Alive: Yes
    4. SIP Port: 5060
    5. Proxy: sipshield1.vif.com
    6. User ID: Your SIP ID
    7. Password: Your SIP Password
    8. Dial Plan: (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|[2-9]xx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
  10. Click Save Settings